With the development of economy, more and more warehouses are using storage shelves for storage. However, there are some more precautions in the process of use, but it is not very clear how to use storage shelves in the warehouse to make the shelves The shelf life is longer and safer. The shelf factory storage shelf uses the principle of three dos and three don’s, so that you can use the shelf more freely.
1. To be high light and low weight, storage shelves should follow the principle of the bottom of the storage shelves with light weight, that is, put heavy objects on the bottom layer and light objects on the upper layer to prevent top-heavy and conducive to balance.
2. Handle with care. When placing the goods, you must handle with care. One is to ensure the stability and safety of the shelf, and the other is to ensure that the goods will not damage the shelf factory.
3. To prevent moisture and rain, although the columns and beams of storage shelves are all metal products, and the surface is painted, they may rust over time after being exposed to moisture, which will affect their service life. The shelf laminates are mostly wooden boards, and the position near the window is susceptible to rain. After the rain, the wooden boards will be deformed and warped.
4. Don’t be overweight or overweight. There should be a space of no less than 100mm between the goods in the storage shelf and the laminate. The shelves of different specifications are designed and manufactured according to the load-bearing design. Therefore, the weight of the goods placed on the shelf must be within the weight of the shelf. The warehouse shelf manager is good to make a load-bearing limit mark on the shelf.
5. Don’t oversize and oversize. This refers to card size. Common card board specifications are between 0.8m and 1.2m in length and width. For example, the length of the beam of the heavy beam type rack is generally 2.5 meters, which is designed according to the width of the two pallets. If the pallet used is non-standard, or the size of the goods placed on it exceeds 1.2 meters, it may hit the column rack factory when it is jammed or pulled when it is placed on the shelf.
6. Do not collide and deform. The easily damaged parts of the storage shelf are the aisles and the uprights at the corners, which are usually deformed due to the collision of the forklift. Shelf suppliers provide matching anti-collision pillars according to different shelves, aisle widths and transportation tools. Anti-collision guardrails should be installed at all passages. The installation of anti-collision columns plays a very important role in protecting the shelf columns.