In recent years, with the development of logistics warehouses, the storage rack industry has been developing rapidly, and a large number of manufacturers have emerged. According to incomplete statistics, there are now at least thousands or more of large and small shelf manufacturers in China, so how to find high-quality shelf manufacturers in these factories? Spieth shelf manufacturers share their knowledge of how to distinguish high-quality and low-quality storage shelves, hoping to help everyone buy high-quality shelves.
How to distinguish the pros and cons of shelves?
1. Look at the material and thickness of the shelf: high-quality steel and appropriate thickness are important indicators to ensure the quality and load-bearing capacity of storage shelves. Only by using high-quality steel and appropriate thickness can its load-bearing capacity be achieved and customers can use it more assuredly;
2. Look at the structure of storage shelves: dividers and pillars are an important part of storage shelves. The divider can enhance the strength and overall stability of the storage shelf. In addition, since the storage racks are usually carried by forklifts, the probability of collision between the forklifts and the rack columns is relatively high, and the anti-collision guardrail can avoid the losses caused by such collisions. Therefore, the more the cross section of the column is bent, the more uniform the better, the more hooks of the beam, the better the force, so that the structure can be stable, the force is good, and the force is durable;
3. Look at the surface treatment of the shelf: it is best to spray evenly and have strong adhesion. If the surface spray paint is easy to fall off, then the shelf is easy to embroider. Whether the surface is sprayed evenly depends on whether the inner edge of the column hole of the storage rack is missing. In addition, it is necessary to observe whether there are bubbles, orange peel, etc., which can also be identified by tapping hard objects;
4. Check the welding process of the storage shelf: the identification method is to observe whether the weld is even and full, and whether there is missing or missing welding;
5. Check the installation quality: the main identification method is measurement. Whether the verticality error and diagonal error meet certain standards.